Quick detail of RFID Reader UHF:
Communication mode:Modbus RS232;
Support Standard:ISO18000-6C,EPC C1G2;
Waterproof/ dustproof:IP67;
Fixed type:4*M4 screw;
Communication Interface:M12A(4pin M) + M12A(5pin M) ;
Specification of RFID Reader UHF:
| Specification | |
| Support Standard | ISO18000-6C,EPC C1G2 |
| Operating Frequency | 860~960MHz |
| Reading Range | 0-3m |
| Communication mode | Modbus RS232 |
| Communication rate | 9600~115200 bit/s |
| Power Supply | 24V DC(9-30V) |
| Current | <0.38A@24V DC |
| Physical parameters | |
| Dimension | 100*100*35mm |
| Weight | 160g |
| Fixed type | 4*M4 screw |
| Housing Material | ABS and Metal plate |
| Color | Black |
| Indicator light | LED*2 |
| Interface | M12A(4pin M) + M12A(5pin M) |
| Application environment | |
| Working Temperature | -40℃～+85℃ |
| Humidity | 5%～95%RH |
| Waterproof/dustproof | IP67 |
Feature of RFID Reader UHF:
Efficient RFID identification solutions for process optimization,
help improve tool recognition and complete traceability of
production and logistics processes.
RFID Reader UHF Application:
Power Battery Assembly
Install the reader at the RFID collection point, and the on-line
station collection point reads the RFID tag in the material box to
obtain the information of slots in the material box (each slot is
equipped with a cell with different voltage), The voltage
value/grade of the test cell is written into the material box RFID
tag at the test station of the voltage cell. When the cell is
classified, read the RFID tag information of the material box and
connect the robot in real time to automaticaly put the cell into
the corresponding cell transport track. After the robot takes down
the cell with different gear from the transport track and puts them
into the same material box it will write the cell gear information
into the RFID tag of the material box. Through the operation of
each station on the RFID tag, a series of processes such as cell
division, transportation, encapsulation, and assembly are completed
in the process of cell assembly.
Intelligent Application of Home Appliance Manufacturing Process
Through RFID data acquisition technology (By adding RFID tags on
the product/tooling board and deploying RFID readers on the
workstation),the unmanned,automatic and real-time identification of
single-item products on the production line is realized.
Using real-time collected product information,complete error
prevention of mixed flow production materials,real-time push of
process guidance,automatic diversion of defective
products,automatic generation of quality reports,product
traceability management,mixed flow line alarms,and equipment
automation docking.
The production management system is an information system that
combines RFID products to obtain real time data on each workstation
and upload it to the server, to facilitate data analysis, improving
the transparency and controllability of enterprise production site,
thus to realize high efficiency and ROI.
Dimension Drawing(mm):
Installation Instruction:
This reader use four M4 screws to fixing. According to the
installation environment of the site,we can support bracket to
install.If there has Metal plate beside the product,please make
sure that the distance between reader and Metal plate has more than
15mm,or it will influence the performance of reading and writing.
When there are more than two readers to be installed, the distance
between the readers needs to be greater than 10m.
